All Posts

After the first 50 classes we started a new course. I chose to do the course called IOT (internet of things). The Internet of Things...

This project took a long time, as gaining access to your Wi-Fi is very difficult. Another reason is also because of how fragile and...

For the past three lessons, we have been working on a maze-solving robot. This project looks like and is inspired by the line-following...

Today we started on a very exciting project, which was the ‘find my location‘ app or navigation app. We started with the fundamentals of...

We were able to complete the voice-controlled robot, and it was a major success. The robot was controlled using the app we have...

Today I am going to be discussing the apps we have used throughout this course and the app we have created for the voice-controlled...

We worked on the coding for my audio-controlled robot today. This project focuses on the commands we give it. For example, if I tell the...

This lesson focused on replicating the functions of a phone app. The way this app works is that when you click the image of the person,...

On the 19th day, I started using my coding skills to create an app. This app is only accessible on Android phones. Our first step is to...

In today's class, we began with a new topic, the Bluetooth connection. This project required the HC-05 board, which is the connection...

In this lesson, we moved the robot using the keypad. This meant we needed to give each direction a specific number. These are the notes...

What is a safe? A safe is a password-protected system that only opens if the correct password or digits are typed in. If not, the screen...

In this lesson, we went into further detail on the "customekeypad" library. This included the use of the 8-pin keypad. We started off by...

We had to download a particular library from the Arduino IDE on the fourteenth day of course. The components required to control the rows...

This was a very exciting lesson because it involved the use of a joystick controller. At first, we controlled the sprite, which included...

Today we used the second-to-last section, which was "sensing." This section helped me give commands between sprites. This project was...

Today was a very exciting class as I got to use 3 new sections of the Snap4Arduino, which were the motion, look, and sound sections....

I found this project very interesting as the direction the board is facing activates different parts of the robot. In this case, we were...

During this project, I learned how to create a semi-realistic firetruck. This is because this robot uses a motorised fan instead of water...

In this project, I am going to create a robot that follows a black line from beginning to end. I used two sensors, DC motors, black tape,...